Your position:Home > NEWS > Product information > the pouch laminator process of making cards

Product information

the pouch laminator process of making cards

发布时间:2021-11-26 12:20:28  浏览量:213
PVC sheet set for pouch laminator
Printing method: Inkjet printer (Epson series,HP series ,etc)
Laminating type: pouch laminating
Color: White ,golden or silver
Thickness: 1. Two printable PVC sheet, each one is 0.15mm
           Core sheet 0.46mm
         2. Two printable PVC sheet each one is 0.25mm
           Core sheet 0.28mm
Size: 200x300mm or as per your  requirement
 

Material and laminating composition:



Inkjet-printing set:
Choose quality as Photo
Choose paper quality as High quality glossy photo paper
Reverse-print selected
Making process example:

Steps:
1.  Design in computer, you can use Corel-draw, etc. software to make design in my omputer
2.  Put the blank printable overlay/film into the inkjet printer ,reverse-print (Note:  when you put the printable overlay/film into the inkjet printer, please put right side for print, DON’T PUT WRONG SIDE!)  you  may print two films, one as front side of the card, one as backside.
3. After printing, let the printed film dry around 5-10 minutes, then, remove the protection film from the both sides of the core PVC sheet, put one printed film on one side of the PVC sheet and put the other printed film onto the other side of the PVC sheet, then, put them all into the pouch laminator for lamination. you may set the temperature at 130-140C, to get a better laminating result,you  may laminate twice.
4. After laminating, you can use a cutter to cut the laminated sheet into two half sheets (two pieces of sheet with size of 100x300mm)
5.  Put the sheet into manual puncher for punching
6.  After punching, you will get final cards.